I can only seem to add one column at a time.
How do I add multiple columns at once in WEBI?
Re: Administrator and Partner Development options in C4C Tenant
First you must select the appropriate scope in the Business Configuration work center, click Finish and then complete the milestone in the activity list called "Confirm Milestone: Design Accepted". Once the milestone confirmation is complete, you can log off and log back on to see the Business Partner work center. Then you have to set-up a service agent user and assign the work centers that you are looking for. If you need help, the Administrator Guide at http://help.sap.com/cloud4customer?current=on-demand provides instructions.
To gain hands on experience with the implementation process, I would suggest that you take one of the Implementation Experiences that we offer. You'll receive an enablement system and guides that will walk you through all of the important implementation steps. The links for the two enablement services are below.
https://www.regonline.com/SAPSalesODImpExp
https://www.regonline.com/SAPServSocImpExp
Have fun!
Append in FTP File receiver
Hi,
I have a scenario where sender system is real time & sending the data to PI many times a day ( SOAP)
On the other hand receiving system is ECC system which runs on batch mode nightly.
This is SOAP to File scenario. ECC needs one complete file/message per day for the all the SOAP messages received on that day.
I am thinking to do this via SOAP to File ( using FCC) and choosing mode as Append in file creation mode.
Please let me know if this best approach.
Also Can i name the file with date stamp to identity ? Also once the file is ready, ABAP program will pick it up for proceeding
Then we need to delete the file so that next day data is saved on another file with date stamp
Please advice the best design for this scenario..
Re: Integrating SAP C4C with SAP ERP using PI
Hi Montezuma,
Please give a name to your Cloud for Customer (C4C) system and recommended is the tenant ID which you can find out by opening a communication arrangement in C4C which should display the tenant ID. Use the same tenant ID as the name for Technical System and the Business system.
For the System Host Name : please use the host name of C4C (The hostname can be taken from the URL that you use to access C4C).
Hope this helps.
Thanks,
Prakash
Re: Business Explorer - Critical program error
Hi Flavio,
Sounds like one authorization is not active, please check list authorization with you user and try regenerate.
Regards.
Career Advise Request for SAP BW/BI/BO Area
Hi SAPers-
I have 9 yrs Work Experience in Business Development and wanna make a career move to SAP.
I am interested in starting a career in SAP BW/BI/BO.
Please suggest me the best option SAP BW7.3 OR SAP BIBO4.0 in relation to job market in NA,Europe and Middle East
Regards
SaiPrasad
Message was edited by: Colleen Lee - changed title from "Question" to something more meaningful.
Re: Locating a structure in a program..
if you know the data element / field name from the structure just hit find (binocular) and enter field name and hit enter.
Re: Embedded Analytics, SAP Best Practices, Rapid Deployment Solutions, All in One. Best way to connect ERP to BOBJ???
Hi Raf & Tammy,
Thanks for your quick replies, and it's great to hear that we're in a position to use this functionality.
We upgraded to EHP7 earlier in the year and are in the process of patching this to SP7 for a fiori POC, so sounds like we're all good.
thanks again, Fiona.
Re: Upload Marketing Permissions with LSMW and CRMXIF_PARTNER_SAVE
is done.
Re: Events Cluster Edition
Hi Cristian,
I pass through this situation many times with many processes and the finally recommendation of Sybase or SAP today its not having any object in witch both instances make dml operations because of internal sync of locks and pages. The processes sleeps in events mostly related with CLM or OCM.
SAP releases SP 130 with many changes, one its single instance database in order to config an ownership to a database on an instance. Have you taken a look at it? Perhaps it may help you.
Regards.
Javier.
Re: EP Training
Hi Sagarika
Again, what I am really confused about (and also concerned) is that you are taking charge/control of her career. Regardless if she was posting under your account or not you are here asking for advise and not her. Again, it is great that you are being a good brother and supporting her but she's going to have a hard time.
I'll be honest (no idea if you work in SAP area and/or have read other posts in this forum): SAP is cut-throat area to get a step through the door. You (in this case, your sister) have got to want this really badly and be prepared to work hard no matter which module or technical area you enter.
My concern for your sister is that her not being here sends a message that she is not here asking the question herself she may not be in a position to succeed on getting a job post education (or even certification). She cannot have her brother apply for jobs and turn up to job interview for her. As far as creating her own user id, if she is going to enter the world of SAP then eventually she'll be in SCN asking technical questions and might actually want to build her own reputation.
Why should "that should be done by me only" when this is her career?
You have caused no inconvenience in being here and again, wonderful you are looking after a family member. But I do think you could be more helpful in guiding her through this process and explaining SCN/showing her/helping her but make her take the first steps. She will have more chance of success through guidance.
As far as job opportunity goes - again search SCN and you will see it - but getting your foot is the door is one the hardest. If she has a job offer and is being paid to learn EP then go for it. It still has use but she might want to diversify skills (never stop learning to remain current in the market).
Regards
Colleen
Re: ESS CL EL ERROR
can you explain the scenario? You mean you apply the leave togather ie consecutive days? and you want to validate this? You can use BADI PT_ABS_REQ and call R/3 exit which is being called successfully in PA30 as its not called in Leave request see below http://wiki.scn.sap.com/wiki/display/ERPHCM/Validations+for+ESS+Leave+requesthttp://scn.sap.com/thread/1588403http://scn.sap.com/thread/3360997
How do I read multiple lines in RFC_READ_TEXT with one request?
Hello,
I am going through some problems, I need to access a large number of texts relating to the Purchase Order.
With the help of this topic(Retrieve texts from a sales order by using RFC_READ_TEXT), could use function RFC_READ_TEXT to access one of the purchase orders I needed.
But I need to access more than 22,000 requests per month. And according to the thread I mentioned I can only return one text at a time.
How could I do to extract a set of Purchase Order text with one request using RFC_READ_TEXT?
I really appreciate everyone's attention.
Thanks
Re: missing menu "Library Item Phase Configuration" under contract generation
Hi Santosh,
I am facing the same issue. Could you please indicate me if you found how to solve the problem?
Many thanks.
Kind regards,
Marc Romagosa
Re: Fixed Text+dynamic filename in file to file scenario- Request Help!!
Hello,
You can write a simple AM to create dynamic file name in a file to file pass through scenario.
Thanks
Amit Srivastava
Re: XSLT mapping for truncate fields
Hello,
Paste ur mapping error screenshot.
Thanks
Amit Srivastava
Re: Block Editing of Totals in System Currency.
Dear Sebastien,
This setting is to prevent user in editing the total in system currency. It looks like a good way to protect system integrity. However, it may create issue in some circumstance for data operation. It is better not checked. No user would like to edit those totals anyway. Manual control for this is more flexible.
Thanks,
Gordon
Re: News and Target Mapping Tile templates are missing from Launchpad admin
Hi Masa
It is fixed per instructions. I had to clean my browser cache as final step.
Thank you
Santosh
Re: Pass Multiple Values.
Use ReportFilter([Object]) for passing multiple values
Re: load transactional data into bpc
Im not sure if I understand your question or what is "BPC axis" but if you want to map an InfoObject you can do that with Transformation files, meaning two dimensions make up one in BPC or if you want to map one key figure to a specific account since BPC can only hold one fact/measure/key figure you achieve that with *MVAL also with transformation files