Hi..
I hope you can try SHDO to customise the screen fields in standard screen. Please find the link.
http://scn.sap.com/docs/DOC-44621
Regards
Rajkumar Narasimman
Hi..
I hope you can try SHDO to customise the screen fields in standard screen. Please find the link.
http://scn.sap.com/docs/DOC-44621
Regards
Rajkumar Narasimman
Sure - while I suspect the UNION was a problem with my current issue - I don't think we've used that on any other alerts - I'm still at a loss as to why much simpler items don't work.
The attached runs daily for both email and internal alerts.
Hi Suresh,
I need to send an input table as parameter, I build the batch request with multiple row to fill the table, but when I do the POST call, NWGW call the RFC row by row (not send one table with multiple rows, send table with one row and call RFC multiple times). When I set the breakpoint in the RFC the system opens one session for every row I sent.
My batch request is (in this case the breakpoint open two sessions):
--batch
Content-Type: application/http
Content-Transfer-Encoding: binary
GET XXX/?$filter=Matnr%20eq%20'1007232' HTTP/1.1
--batch
Content-Type: application/http
Content-Transfer-Encoding: binary
GET XXX/?$filter=Matnr%20eq%20'1007233' HTTP/1.1
--batch--
Hi Sajid ,
In your post you say that you have a parallel EHP7 landscape . Dont you have a development system for this parallel landscape .
The idea is PRD , QAS , DEV ,SBX
parallel : DEV1,QAS1,
DEV1 copied from DEV
QAS1 copied from QAS /PRD
You start with upgrading SBX, and then DEV,QAS,PRD in that order .
DEV1,QAS1 will remain in EHP4 until you upgrade the production .
Once your DEV system is upgraded to EHP7 Your transports should be freezed from that point and any new / emergency correction should follow the route DEV1- > QAS1->PRD .
DEV->QAS should be used as to fix any issues in EHP7 / requirements thereafter that needs to be moved once PRD is upgraded to EHP7
Once PRD is upgraded you should follow or revert to DEV-QAS-PRD route . you can then upgrade DEV1 and QAS1 to EHP7.
As far as i know it is not recommended to move transports between systems which are in different Version /SP level .
Thanks ,
Manu
Dears,
may you suggest me the reference of the enhancement you are proposing or SAP documentation where I can find tech. information?
Thanks in advance for your cooperation,
Regards
Francesco
Hi Siddhesh,
thanks for your query. That´s what it looks like:
The webservice call always produces a popup for username and password, even though that data is already saved in the Logical Port, but somehow it is not used by the Webservice Runtime. That´s why I can not run the function module in background successfully, and that´s a problem.
Best regards,
Ringo
Victor podes pasarme en detalle exactamente qué campo quieres hacer no modificable?
Es el campo "NETWR" ??
Hi All,
Anyone having any idea on this issue please. Thanks.
Regards,
Smita
Hola BPC Friends
I am working with UNIFIED MODEL
I have created a query bw using some variables and I have also created the report BPC using the option set query variable when opening file.
So I click from BPC Administration on the EPM-Add in for excel and I select my report BPC and BPC shows me the panel with the variables and I am happy.
The problem is that: if I close the report BPC but not Excel and I open again the bpc report, BPC opnes the report using the past value for the variables and it doesn't ask to the user to fill the panel
What I have to do?
Praveen,
Please check SYNTAX.
What happened to ELSE?
Hi ,
I can able to open the transaction codes OM13 & OM17.
for the db statistics run in /SAPAPO/OM_LC_UPGRADE_LC ,many tables are not getting refreshed.
Thanks in advance
Que tal Douglas.
No necesariamente, en tu carpeta de instalación del parche existe una carpeta con el nombre de "Packages" y dentro de ella encontraras las carpetas que contienen los diversos componentes entre ellas "Outlook Integration Server" la cual contiene su respectivo archivo de instalación. Yo sugiero que instales el Outlook Integration del parche más actual. Suerte.
Hi
Connection parameters: TYPE=B DEST=<Java Rfc client> MSHOST=gbwysap140 MSSERV=3251 R3NAME=q51 GROUP=PUBLIC PCS=1
Please check whether the above values are correct in the destination system
Get the correct message server host and port from transaction SMMS ( goto ->parameters )
Check whether a group "PUBLIC" exists as per transaction SMLG
Aldo check whether the destination system details are enetered correctly in /etc/hosts file
Thanks ,
Manu
I added a custom field on billing screen at item level in VF01/VF02/VF03 .For this field I created corresponding append structure in dictionary VBRP-ZF1
Save action work fine and value get stored in ZF1. I used implicit enhancement.
Now I need that same field gets populated from value maintained in standard idoc customer data segment starting as E1W....
I may use a different field in standard idoc segment E1W..
having value intended to get saved in VBRP-ZF1.
How to achieve this ?
Vishnu,
And I think that you need to configure the possible follow-on documents for Biddings and Auctions.
Best Regards!
Gax
Thanks D. Van Heumen
How do you set the binding context for the detail view ? Have you specified the model name while setting the binding context ?
oDetailView.setBindingContext(oContext,"delivery");
Hi Markus,
Great and yes it can be tedious... The change we made in .NET was to remove the specific steps that did a lot of this for in previous SDK's because everyone seemed to always want something slightly different, we left it all up to you to do the coding.
And due to the way .NET Framework handles printing it's the only way we could...
See if this sample attached will help you. I was written by DEV so it covers everything that should be required. After unzipping the attached file then rename the file to *.zip and the whole project is there.
Don
You can try inserting a datasource using VBA; you check the SAP help for that
http://help.sap.com/businessobject/product_guides/AMS20/en/20SP1_aaoffice_user_en.pdf
Hi,
I'm populating value for user feild AFVGD-USR02
using method IF_EX_NETW_USER_FIELDS_F4~AT_F4, which is working fine. but i want to restrict user not to edit that field; restrict user only to select from f4.
how do i achive this?
i have below code for now. in IF_EX_NETW_USER_FIELDS_F4~AT_F4,
CALL FUNCTION
'F4IF_FIELD_VALUE_REQUEST'
EXPORTING
TABNAME = 'ZCOPQ_MAINT'
FIELDNAME = 'COPQ'
SEARCHHELP = 'ZCOPQ_MAINT'
* SHLPPARAM = ' '
* DYNPPROG = ' '
* DYNPNR = ' '
* DYNPROFIELD = ' '
* STEPL = 0
VALUE = 's'
* MULTIPLE_CHOICE = ' '
DISPLAY = 'F'
* SUPPRESS_RECORDLIST = ' '
* CALLBACK_PROGRAM = ' '
* CALLBACK_FORM = ' '
* CALLBACK_METHOD =
* SELECTION_SCREEN = ' '
* IMPORTING
* USER_RESET =
TABLES
RETURN_TAB = lt_return
* EXCEPTIONS
* FIELD_NOT_FOUND = 1
* NO_HELP_FOR_FIELD = 2
* INCONSISTENT_HELP = 3
* NO_VALUES_FOUND = 4
* OTHERS = 5
.
IF SY-SUBRC <> 0.
* Implement suitable error handling here
ENDIF.
read table lt_return into ls_return index 1.
if ls_return-fieldval is not initial.
e_value = ls_return-fieldval.
endif
.