Dear Kartik,
Have you set Error message in OMRM i.e. M8-108 & M8-462.
I hope this will work.
Regards
Mohsin Abbasi
Re: duplicate invoice check failed
↧
↧
Re: Accounting entries for subcontracting - MPVs
Please follow this link to the docu SAP-Bibliothek
because in this link you can see the account documents in a bigger size than in the other link above.
This should clear your doubts. within this docu you will find many more links, e.g. to the normal subcontracting. You can then compare account postings between the alternatives yourself.
Of course there are much more account postings if you bill your subcontractor for the components, as they are in addition to the normal subcontract postings.
↧
Re: Error in Eclipse while reading NW service
Thanks Dhanajay, I will try and let you know after some more time. You rock .. Hey tell me how did you copy paste the code in this editor so clearly..I tried copy pasting in MS word an then again copy paste to this editor. Thank again. Thanks
↧
Re: default SAP logo on CMC logon..
I tried both suggestions.
There is no "Tomcat\Work|Catalina\BOE". There is localhost and I renamed it and it generated a new one and replaced the logo. Both tomcat and SIA was stopped during Wedeploy otherwise it will fail.
Thank you,
SS
↧
MM-SRV - Múltiplos idiomas em textos curtos de serviços
Boa tarde.
Prezados,
Ativei o mestre de serviços aqui no cliente e em seguida criei as hierarquia, usando a funcionalidade da transação ML10. Nessa transação criei uma hierarquia com nível I, nível II e nível III, e acabei esbarrando numa particularidade da nota SAP 635456.
As hierarquias criadas pela transação ML10 não permite usar dois idiomas, no caso aqui do cliente seria PT e ES. Se a hierarquia é criada no idioma PT, ela continua exibindo as informações em português, mesmo quando o usuário se loga em espanhol.
Alguém conhece um meio de fazer com que o usuário possa visualizar as informações de acordo com o idioma do login, PT e ES?
Desde já, agradeço a todos pela atenção.
Att.,
Jefferson Rainha
↧
↧
Re: Error in Eclipse while reading NW service
sap.ui.jsview("zhk_ui5_empcrud.EmpDetails", { /** Specifies the Controller belonging to this View. * In the case that it is not implemented, or that "null" is returned, this View does not have a Controller. * @memberOf zhk_ui5_empcrud.EmpDetails */ getControllerName : function() { return "zhk_ui5_empcrud.EmpDetails"; }, /** Is initially called once after the Controller has been instantiated. It is the place where the UI is constructed. * Since the Controller is given to this method, its event handlers can be attached right away. * @memberOf zhk_ui5_empcrud.EmpDetails */ createContent : function(oController) { var oPage = new sap.m.Page({ title : "Employee Details", }); // Table or Dashboard to show Employee Data var oTable = new sap.m.Table({ id : "Employees", itemPress : [ oController.ItemPress,oController ], columns : [ new sap.m.Column({ width: "1em", header: new sap.m.Label({ text : "Emp ID" }) }), new sap.m.Column({ width: "1em", header: new sap.m.Label({ text : "Name" }) }), new sap.m.Column({ width: "1em", header: new sap.m.Label({ text : "Address" }) }), new sap.m.Column({ width: "1em", header: new sap.m.Label({ text : "Designation" }) }), ] }); //Template to map the data to the respective column var template = new sap.m.ColumnListItem({ id: "first_template", type: "Navigation", visible: true, cells: [ new sap.m.Label("ID", { text: "{Empid}" }), new sap.m.Label({ text: "{Empname}" }), new sap.m.Label({ text: "{Empadd}" }), new sap.m.Label({ text: "{Empdes}" }) ] }); var oFilters = null; oTable.bindItems("/results",template,null,oFilters); oPage.addContent(oTable); return oPage; }
});↧
Re: F & F Clarification
Hi Saroj
Thanks for your quick response.
But full and final settlement wage types are maintained in IT 15 like Joining bonus recovery, Notice pay recovery, Training cost etc.
Regards,
Sai
↧
Re: Error in Eclipse while reading NW service
Use this code in your view.
You have used some unwanted closing tags.
Regards
Dhananjay
↧
Re: CCLM Background jobs failed
We have a similar Issue SM_CCL:QUAL_XXX_0020275865 was aborted and SAP has suggested the below
The Quality collector job is failing because ATC is not properly configured for the Managed system.
According to SE16 table e2e_efwk_log, there is no ATC data being extracted from the managed system.
I also attempted to run the remote function call SATC_CI_GET_RESULT_CATALOG, and it failed to produce records.
I've attached a link which outlines the method of ensuring ATC is properly configured. (ATC_config).
Once ATC has been properly configured, the QUALITY job should run to completion.
please refer to the below link for setup details
Getting Started with the ABAP Test Cockpit for QMs and Admins
↧
↧
Migrating application to Power Builder 12.6 Classic
Hello All,
We are planning to move our application to Power Builder 12.6 and I need your help for the same.
Before moving our application to 12.6, I would like to know if there is/are any show stopper issues reported or any issues which can make application from being work.
I need some link which I can refer and based on what we can take decision to migrate our product and I need your honest opinion for moving product to 12.6 version.
Thanks in advance...
↧
Dependent idoc message not created when using BD64 filter
In ECC I want to use a filter on account group to send only DEBMAS_CFS messages for payer and sold-to.
Whenever an DEBMAS_CFS is triggered, the address and contact data needs to be triggered too, so ADRMAS and ADR3MAS idocs are needed.
Based on instructions in SAP Note "1675599 - Receiver Determination Address IDocs" i set the dependencies:
Without the filter on account group, DEBMAS_CFS, ADRMAS and ADR3MAS idocs are created.
With the filter active, like in the picture above, only DEBMAS_CFS idocs are created (BD12/change pointers).
What step am i missing here?
↧
Re: HU scan should default material and qty
Hi Srini,
go to customizing:
Extended Warehouse Management - Mobile Data Entry - RF Framework - Define Steps in Logical Transactions
Find Logical transaction PI****, select the row
Click on Define Validation Profile
Copy the appropriate step into you presentation profile and untick the checkbox as shown below
If you are not sure about the step name, open the RF transaction using /scwm/rfui and use the keyboard shortcut Ctrl + Shift + F1.
Regards,
Petr
↧
Re: FileUploader multiple example
you can a little dirty trick
var index = 0; oFileUploader1.upload = function() { index = 0; sap.ui.unified.FileUploader.prototype.upload.apply(this, arguments); } oFileUploader1.getHeaderParameters = function() { var i = index++; return [ new sap.ui.unified.FileUploaderParameter({value : "" + i, name : "ZZindexZZ" + i}) ] }↧
↧
Re: How can i Add the System details while deploying app to ABAP repository.
Hi Lakshmi,
Please add SAPJVM Bin Path value as Value to PATH variable in user variables as in added screenshot before,
Once added , please run Go.Bat in new command prompt.
Regards
Virinchy
↧
Renewing public key certificate used for Seeburger AS2
My general question is when a public key certificate, used for Seeburger AS2 payload decryption and digital signatures, needs to be renewed, how carefully do the certificate renewal steps need to be coordinated for a seamless transition? More specifically...
1. Once we import the CSR response from the CA, will the public key currently used by our partner become invalid, or will it continue to work until its expiration date?
2. Will our partner be able to validate our signature after the new CSR has been imported, but prior to them applying the new public key certificate in their system?
3. Or can we renew the certificate, import the CSR request, provide our partner with the renewed certificate, and let them apply the certificate at their own volition, provided they do it prior to the original certificate expiration?
↧
Making a field dynamically mandatory?
Hi,
I have a task to make Location field mandatory if the importance is high in Appointment.
For this i enhanced BT126H_APPT/ApptDetails in the context node Btactivityh GET_P_ACT_LOCATION i did the coding.It is working fine.
Now the problem is
1) Importance->high Location->mandt Fine.
2)Importance->low Location->Not mandt. Here mandatory mark(*) is getting is removed but field is getting highlighted with red color.
I have attached screen shot
Can any body please tell me how can i handle this?
Thanks,
Hari.
↧
Re: Two factor authentication for SAP GUI
Hi
I want to try this senario of 2 factor authentication on sandbox environment solution manager 7.1 system (ABAP).
I am little confused as search results are coming to go for SSO2.0 but i want to use authentication using sap logon pad not using sso client tool.
can we do this using sap authenticator ? any documentation or steps needs to be done at ABAP side to achive this.
i am looking for solution like as mentioned below blog but want to go with SAP authenticator instead of "AuthShield AAA"
please direct me me if you are able to understand my requriment
thanks
Samrat
↧
↧
Re: Creating a Sort Version
Thanks, Jaymin, for your quick response!
Janie
↧
Re: Contabilidad electrónica, en octubre
Hola a todos, en mi caso ya tenemos listos el Plan de cuentas y la Balanza pera enviar al SAT, también ya tengo listos los campos de UUID y RFC en Finanzas, SD, MIRO, pero ¿Alguen ya desarrollo algo para integrar estos datos en cada pólizas, por ejemplo tenemos la facturación electrónica la cual genera el XML y que ya tiene implícito el UUID, ¿Cómo puedo tomar ese dato y regístralo en cada registro de venta UUID y RFC) de igual manera para la contabilidad, o están igual que yo esperando a nuevas notas SAP. ¿SAP ha publicado algo con respecto a que los desarrollos debemos de realizarlos por nuestra parte?
De antemano gracias.
Saludos
↧
Re: Webi Input control not displayed on Mobile
I hate to start a new thread...I am also having this issue..basic filter input control not showing up in a Webi. Only options I have is the menu to change tabs in the Webi. No other buttons appear across top.
Device is an LG G3 running Android 5.0.1
BOBJ is 4.1 SP4 patch 6 (i believe)
If I open the same report on my Xperia Z tablet running 4.4.4 Android, I see the menu buttons and filtering works fine.
thanks
jim
↧
