Yes, Lot-size and other vendor-specific settings are really a critical point for choosing MRP area for sub-contracting scenario.
Thanks for your reminding! Caetano.
Yes, Lot-size and other vendor-specific settings are really a critical point for choosing MRP area for sub-contracting scenario.
Thanks for your reminding! Caetano.
Dear All,
I am executing the Function Module FAGL_GET_TT_DATA in T code: SE37 But i get the following error Message
Error generating the Test Frame.
Could you please help me out, how to proceed further
Thanks in Advance
Jose.
Hi,
Where did you get the rc=156 ?
I believe the the rc=156 is not returned by SAP because there is no 156 return code defined in SAP.
Please refer to following SCN wiki page:
SAPEVT - Troubleshooting Guide - Technology Troubleshooting Guide - SCN Wiki
Thanks and best regards,
Shi Feng
Hi Tejasvi,
What your structure of it_output? This itab should only have one field with string type.
regards,
Archer
Errors in file D:\ORACLE\diag\rdbms\borepo\borepo\trace\borepo_dbw2_4256.trc:
KCF: read, write or open error, block=0x238 online=1
file=3 'E:\ORADATA\DATAFILE\BOREPO\UNDOTBS01.DBF'
error=27070 txt: 'OSD-04016: Error queuing an asynchronous I/O request.
O/S-Error: (OS 1117) The request could not be performed because of an I/O device error.'
Encountered write error
DDE rules only execution for: ORA 1110
----- START Event Driven Actions Dump ----
---- END Event Driven Actions Dump ----
----- START DDE Actions Dump -----
Executing SYNC actions
----- START DDE Action: 'DB_STRUCTURE_INTEGRITY_CHECK' (Async) -----
Successfully dispatched
----- END DDE Action: 'DB_STRUCTURE_INTEGRITY_CHECK' (SUCCESS, 0 csec) -----
Executing ASYNC actions
----- END DDE Actions Dump (total 0 csec) -----
error 63999 detected in background process
ORA-63999: data file suffered media failure
ORA-01114: IO error writing block to file 3 (block # 568)
ORA-01110: data file 3: 'E:\ORADATA\DATAFILE\BOREPO\UNDOTBS01.DBF'
ORA-27070: async read/write failed
OSD-04016: Error queuing an asynchronous I/O request.
O/S-Error: (OS 1117) The request could not be performed because of an I/O device error.
kjzduptcctx: Notifying DIAG for crash event
Hi,
I have created a local connection to a real-time BW infocube and have connected via local connection to EPM. The EPM reports works as expected during reporting to slice and dice data.
What I am currently trying to do is to change the report to an input form to allow the data to be updated into the infocube. EPM allows the changes and once 'Save Data' is clicked it does not recognize the data changes (There is no data to save)
Have anyone experience a similar issue or have experience with the scenario above? Thank you.
Regards,
Ivan
Yes we have schedule activity on weekends. And we are having this error most probably on weekends only.
>The managers are saying they are going on holiday on such a date and simply want the rules to be effective from that date
But this is also something that is not supported by SAP, right? The UWL substitution rule management application does not let you set the begin & end date? The substitution will be effective as of today.
Because of the above reason, one customer required to build a custom substitution application into portal, so that the users could add the dates for the substitution. Basically this is not that huge thing to build, but of course would not help in your initial problem, unless you set up some kind of Z-table solution with certain enhancements to the standard work item list creation function...
Kind regards,
Karri
Hi Guys,
Please suggest. Is it possible . How we are maintaining in Standard for sap afs.
Regards,
Ravindra
Hi Ashutosh,
It should not have been \\50\sapmnt\trans\
but it should have been \\MIGPRD\sapmnt\trans. Can you please give me solution..i am not able to find that path.
Hi,
As already suggested, we can achieve this scenario by using Percentage based mile stone billing.
Regards,
Ramesh
hI,
I am an SAP functional consultant trying to learn a lil of ABAP. i was trying calling Smart Form using driver program but i am getting a dump.
What i have done:-
I have created a smartform by the name of Ztest_form. Saved, checked and activated it. An FM is generated.
I come ot SE38 and create a prog.
I defined the data :- FM_Name type RS38L_fnam.
I call the the generated FM using the Pattern button.
then i call the Function SSF_FUNCTION_MODULE_NAME
then I change the name of the FM generated due to the activation of the smartform with "FM_Name". Now it looks like as below:
REPORT ZPROG_FORM.
Data: FM_NAME type rs38l_fnam.
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING
formname = 'ZTEST_FORM'
* VARIANT = ' '
* DIRECT_CALL = ' '
IMPORTING
FM_NAME = FM_NAME
* EXCEPTIONS
* NO_FORM = 1
* NO_FUNCTION_MODULE = 2
* OTHERS = 3
.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'FM_NAME'
* EXPORTING
* ARCHIVE_INDEX =
* ARCHIVE_INDEX_TAB =
* ARCHIVE_PARAMETERS =
* CONTROL_PARAMETERS =
* MAIL_APPL_OBJ =
* MAIL_RECIPIENT =
* MAIL_SENDER =
* OUTPUT_OPTIONS =
* USER_SETTINGS = 'X'
* IMPORTING
* DOCUMENT_OUTPUT_INFO =
* JOB_OUTPUT_INFO =
* JOB_OUTPUT_OPTIONS =
* EXCEPTIONS
* FORMATTING_ERROR = 1
* INTERNAL_ERROR = 2
* SEND_ERROR = 3
* USER_CANCELED = 4
* OTHERS = 5
.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
When I save, Check and activate it, everything is fine, but when i test it i get the dump attached above.
Can you please help me with the solution. Would request you to please consider that i am not a technical guy.
SAP.
Hello Aditya
There is no roundup() function. Alesc gave round() function.
Try ceil(KF value)
Regards.
YS
Hi Hossam,
Thanks for your reply.
Please check this updated download here to get the current version
the version pop up should be removed.
Please update.
Regards,
Ziv
Hi Shuai,
Below are the comments from my end.
And you said "3) Yes, they're synchronized and if you have any inconsistency you might face errors during simulations, etc."
--> You can correct those inconsistencies in data. In case of APO/SCM system we use /sapapo/om17 & om13 t codes to correct those inconsistencies
Then:
1) How to backup the data? As I know Oracle hold the whole data, so we only need to backup oracle and not need to backup livecache?
--> Yes oracle does have whole data, but you need to backup both Oracle as well as livecache in order to have a complete live system without any data issues.
2) If I need to backup Oracle and Livecache independently, How can I keep the inconsistency when recover data?
--> the answer in given in reply of 3. And mostly the inconsistencies are related to update which is normally taken care by the Functional teams. Also one need to have a con-current backups defined. The backup statergy has to be like 1st Oracle backup and then livecache or both simultaneously. so that you get a point in time recovery done. or a offline backup during same time windows this will reduce your most issue related to data.
Also to be noted both Oracle/Livecache backup happening at same time affects system performance.
Let us know if you need more inputs on same.
Regards,
Ram
Dear Experts,
I am having problems when viewing a document in preview mode with accented letters (tilde) in spanish language.
I mean, when I enter to the system in spanish ES and I preview a document, the system is not recognizing the accented letters (tilde), instead, it shows the character #. For example the word in spanish impresión is shown impresi#n, the same happens for all the accented letters in all documents that I preview before printing.
I have applied the spanish language as supplementary and It doesn't work.
My system is UNICODE.
Does anyone know what is missing in the language configuration?
Hi Andreas,
Is your issue resolved or still pending.
Regards,
Ram
Hi Sumit,
/SAPSLL/CUHDBLR and /SAPSLL/CUITBLR does not link with table /SAPSLL/LEGCON and /SAPSLL/LCLIC.
GUID_CUHDBLR and GUID_CUITBLR is its table own unique key, there is not reference.
However, you could use GUID_CUHD and GUID_CUIT to reference with table /SAPSLL/CUHD and /SAPSLL/CUIT.
Best regards,
Vincent
Hi all,
I am involved in a SAP social service service implementation where both CRM and PSCD(ECC) is being used. We were able to configure the details so that SXP, GED and GPD are getting created in ECC. But somehow the NCD are not generating. While saving the SSP in CRM the below error messages are coming.
E04CLNT100 is the ECC system details.
Any suggestion / details on this respect will be helpful.
Thanks,
Sid