Quantcast
Channel: SCN: Message List
Viewing all 8594 articles
Browse latest View live

Allowing for the 3rd party java tags - to measure SAP UI page loading performance

$
0
0

Some customers want to measure performance using tools other than HTTP Watch or Thousand Eyes. For example, Soasta mPulse (http://www.soasta.com/performance-monitoring) is considered by some customers to be a viable candidate for such performance measuring, like monitoring C4C page loading, etc.

 

Mpulse add a java tag to the code to monitor performance. Does SAP allow 3rd party tags to be added to the source code (or UI code) - in general? If yes, does SAP have a preferred partner for such tagging?

 

Eugene De Lattes

C4C Manager at Accenture


Re: Configuring List without FLUID

$
0
0

Hi Christopher,

 

If I understand your question then you want to display LIST dynamically without using FLUID.

Although I also understand you have tried GET_DEFAULT_CONFIG method as below.

 

*--> Adding Column to layout configuration

 

*--> tbl_list will contain all your columns

 

LOOP AT tbl_list ASSIGNING <fs_list_data>.

      TRY.

          io_layout_config->add_column(

            EXPORTING

              iv_name               =  <fs_list_data>-fieldname             " Component name

              iv_display_type       =  |{ lv_display_type }|                " TextValue

              iv_index              =  lv_index                             " Index value

              iv_header             =  |{ <fs_list_data>-field_text }|      " To convert the type

          ).

          CLEAR lv_display_type.

        CATCH cx_fpm_configuration.

ENDLOOP.

 

Try to add some code in GET_DEFINATION.

 

LOOP AT tbl_list ASSIGNING <fs_list>.                                               "all field names from config table

    APPEND INITIAL LINE TO et_field_description ASSIGNING <fs_field_description>.              "Setting table properties

    <fs_field_description>-read_only    = abap_true.

    <fs_field_description>-allow_filter = abap_true.

    <fs_field_description>-allow_sort   = abap_true.

<fs_field_description>-name = <fs_list>-fieldname.

ENDLOOP.

 

If your code gives dump then add below code,

 

*--> DUMMY starts

  TYPES: BEGIN OF ty_s,

    cust TYPE char10,

    END OF ty_s.

  DATA lt_data TYPE TABLE OF ty_s.

*--> DUMMY ends

 

 

  TRY.

    CATCH cx_root.

      eo_field_catalog ?= cl_abap_tabledescr=>describe_by_data( p_data = lt_data ).     "Adding blank dummy values to prevent dump

  ENDTRY.

 

 

Thanks-

Abhishek

Esclarecimentos a respeito da Nota Tecnica 2015.002

$
0
0

1. Introdução


Foi publicada a Nota Técnica 2015.002 que trata de diferentes assuntos, conforme segue:

 

Consulta Situação da Nota Fiscal

Agora apenas serão consultadas NF-es com até 180 dias da data de emissão (6 meses). Caso seja consultada uma NF-e mais antiga, a consulta retornará uma rejeição. Na Consulta serão retornados além do XML da NF-e, os eventos de Cancelamento, Carta de Correção e EPEC. Os demais eventos não serão retornados, como os eventos da Sefaz (Manifestações, CT-e Autorizado, dentre outros). O contribuinte poderá obter alguns desses documentos no WebService de Distribuição, de acordo a tabela de disponibilização.

 

Código de Enquadramento Legal para IPI e ICMS

Na Nota foram definidos os valores possíveis para o Código de Enquadramento Legal no IPI. A lista completa pode ser encontrada no Anexo XIV da Nota Técnica. Além disso, foi acrescentado um motivo de desoneração do ICMS relacionado às Olimpíadas 2016.

 

Outras Validações

A partir da implantação da norma, o NCM informado na NF-e passará a ser validado conforme a tabela publicada pelo Ministério do Desenvolvimento (MDIC). Qualquer inconsistência pode resultar em rejeição. Foi adicionada também uma validação opcional do somatório das NF-es de saída (vendas) do Emitente conforme limite anual de faturamento, de acordo com o porte da empresa.

 

Prazos para entrada em vigor da Nota Técnica:

  • Ambiente de Homologação (ambiente de teste das empresas): 01/10/15;
  • Ambiente de Produção, segundo a versão 1.20:
    • A implantação do novo schema XML em produção será efetuada no dia 30-nov-2015 após às 12h desse dia em todos os ambientes de autorização.
    • A implantação da nova versão da aplicação das SEFAZ autorizadoras será feita no dia 01-dez-2015 até às 12h desse dia em todos os ambientes de autorização.
    • Código de enquadramento de IPI: 01/01/2016.


2. Código de enquadramento Legal do IPI


Novos códigos estão distribuídos conforme abaixo:

→001 a 099: compatíveis com cst de imunidade

→101 a 199: compatíveis com cst de suspensão

→301 a 399: compatíveis com cst de isenção

→601 a 699: redução

→999: tributação normal; outros

 

 

Para o SPED EFD ICMS/IPI deverá sair em seguida um ajuste para o registro C170, campo 21 (COD_ENQ) tratando das alterações tratadas nesta nota técnica.

 

3. Solução SAP


Existem3 novas configuração entregues:

 

1. View J_1BAGNV -> Foi incluída a razão "16 - Olimpíadas Rio 2016" para utilização em cenários de isenção do ICMS (CST 40, 41 e 50 ) relacionadas com este evento.

 

2. Tabela J_1BTCENQ -> Tabela para cadastrar os códigos de enquadramento do IPI de acordo com o Anexo XIV - Código de Enquadramento Legal do IPI da NT 002 /2015.


3.  View J_1BATL2V -> Tabela para atrelar o código de enquadramento do IPI ao direito fiscal do IPI. Essa informação será mapeada para o campo cENQ do XML.

 

4. Novas regras de validações


Fique atendo as mudanças nas regras de validação que compreendem:

 

- Verificar a data de emissão da NF-e em relação a data da autorização, conforme o tipo de emissão. Idem para a verificação da data de emissão em relação à data de credenciamento do contribuinte;

- Verificar a existência do código de município na tabela do IBGE, substituindo a atual validação do dígito verificador deste código;

- Verificar se o município do emitente informado na NF-e corresponde ao cadastrado na UF. Idem para o município do destinatário;

- Aceitar a chave de acesso referenciada do documento fiscal “SAT-CF-e”, modelo 59;

- Definidos melhores controles sobre a NF-e referenciada de produtor, conforme critério da UF;

- Definidos melhores controles sobre a IE de Substituto Tributário;

- Viabilizar a operação de venda de combustível ou lubrificante a consumidor ou usuário final estabelecido em outra UF (CFOP=6.667) para a pessoa estrangeira, sem configurar exportação;

- Limitar o conjunto de caracteres que podem ser usados na identificação do destinatário estrangeiro;

- Verificar se o NCM informado no item da NF-e existe na tabela de NCM publicada pelo MDIC - Ministério do Desenvolvimento ;

- Na Nota Fiscal de entrada de devolução de mercadora, aceitar apenas o CFOP 1.949 ou 2.949, no caso de devolução de venda de consumidor final não contribuinte;

- Verificar se o Valor do Desconto informado no item da NF-e é maior do que o Valor do Produto;

- Verificar os valores possíveis para o Código de Enquadramento Legal do IPI, conforme Anexo XIV;

- Verificar os Códigos de Enquadramento Legal possíveis, conforme o CST do IPI informado;

- Verificar o Código de Regime Tributário do emitente informado na NF-e,  em relação ao Cadastro de Contribuintes da SEFAZ;

- Verificar se foi informado o CNPJ/CPF do Escritório de Contabilidade para a UF que solicitar esta informação na legislação estadual.

 

Para consultar detalhes em relação as validações citadas, consulte a Nota Técnica 2015.002.

 

Próxima thread estarei comentando com cenário da Nota Tecnica 003...

 

Abraços,

 

Karen Rodrigues

Re: Error in kapsel logon application while registering users

$
0
0

Hi Daniel Van, Good Morning.

 

Thank you so much !!

 

My issue got resolved by doing the same..

 

Best Regards,

Brajesh Kumar

Re: How to make fields mandatory in Message Address for Custom Notification.

$
0
0

There are 2 ways to make any Notification filed mandatory.

1. Configuration route:

Here Under Plant Maintenance->Maintenance and Service Processing>Maintenance & Service Notifications>Notification Creation>Notification types> Set Field selection for Notifications:

You select influencing button and your notification type then select the Radio button under Required column (against the

field you want to make mandatory)

 

2. User Exit Route: Through SMOD -->User Exit QQMA0014 -->Cutsomer Exit EXIT_SAPMIWO0_020 -->Include ZXQQMU20.

Then put your code in this include.

 

Code Sample

IF i_viqmel-qmart = 'A1'.
   DATA: i_qmsm TYPE TABLE OF viqmsm.
   i_qmsm[] = t_viqmsm[].
   DELETE i_qmsm WHERE kzloesch = 'X'.
   IF i_qmsm[] IS INITIAL.
     MESSAGE ID 'IW' TYPE 'I' NUMBER 464 WITH 'Tasks'.
     RAISE exit_from_save.
   ENDIF.
ENDIF.
:

(The above Code makes the 'Tasks' filling mandatory in the Notification type 'A1')

 

Hope this answers your query.

Regards

Jogeswara Rao

 

Edited by: K Jogeswara Rao on Oct 8, 2010 9:21 AM

Quality Info status column in QA32/QA33

$
0
0

Dear Gurus,

 

In one of recent requirement we received a requirement of user unable to view the Quality Info status as 1st Sample / Pilot / Regular / Self certified while clearing the Usage decision,further more they requested to show the Quality info status of the material in QA32 as an addtional column which is not currently available in standard layout.

 

Currently we have a Z program to view the Quality info status,I suggested the user to download the data and give as input in QA32 for which user feels it is a tiresome work daily hence requested to show in screen based on which UD can be taken by user.

 

Can anyone suggest a solution for the same.

 

Thanks in advance.

 

Vignesh.V

Re: Wage Type Text missing for Custom and Model WTs

$
0
0

Can you post details of error from function RP_ANSAL_FROM_WAGETYPES - details, error code, class, etc?  From the error, press help to give details; navigate to give you error code.  The error could be in the feature ANSAL, currency being not found or conversion error, etc.


Also in MP000800 program module, search for RP_ANSAL, it calls above function (in include MP000840).  Navigate to the function by double click on the function.  You can also navigate to the function code in txn SE37.  Then set a break point at the beginning of the function.  Then execute the error giving txn PA40 or PA30.  Then in debug mode you can find the source of the error.

Re: ABOUT  ADOBE FORM

$
0
0

Sorry I dont know how to set it.

  can you give me an example?


Re: Doubt in EDI 850

Re: CT_DATA is not splited with runlogic_ph BADI

$
0
0

Hi Gresh,

Yes in Dev box,

Basis team are checking to increase to 20.

It's possible to run it in BGD if DIA is not available?

Today I will run it in QA with concurrent users and will update you.

Regards,

Mohamed

Re: Problem with WBS settlement to G/L accounts

$
0
0

Hi Paulo,

  

     Yes you understand correctly but there is more below

     and I checked as you suggested, but WBS was optional in the field status group.

 

On further testing of settlement, This is getting weird:

 

a) I tested while having only cost on the WBS (CE Cat. "1") (Dr. or Cr. Balance). In all cases, the receiver G/L must be without cost element. If the receiver has a cost element, the system asks for cost object "which is not provided by settlement" --> That's OK

 

b) I tested while having only revenue on the WBS (CE Cat. "11") (Dr. or Cr. Balance). Same behavior as point a) which is OK too

 

c) I tested while having both revenue and cost on the WBS (CE Cat. "11&1"). The system demands that the receiver G/L must have a cost element. If I provide a receiver G/L that has a cost element (regardless of its category), the system demands I assign a cost object "which is not provided by settlement".

 

          The result of point c) =  No settlement can be executed due to errors.

 

d) I tried to separate things using source structure (one for cost and one for revenue). Settlement only works if the receiver G/L of revenue source has a cost element. And the receiver G/L of cost source has no cost element. And not the other way around.

 

          The system assigns the WBS to the revenue receiver G/L account !!

          The system doesn't do the same to the cost receiver G/L account.

 

 

     Accordingly, revenues settled from the project are reported right back to the WBS element ! this also doubles the revenue after settlement in the "Hierarchical Reports" while keeping the revenue to the same amount in the "By Cost Element Reports" only changes the carrying cost element.

 

Help!

Re: F110 Vendor Bank Info Missing

$
0
0

Hi

 

Please go through with proposal log there you will what is the reason .

 

check in FBZP bank determination assign the payment method to the House bank

 

Regards

 

Hidyath

Re: Errors with HANA Hadoop Integration

Re: Joining PO and Invoice data

$
0
0

Excellent.

 

So I would assume you run FKKINV_MA for invoicing.

 

Here are the table names:

 

Invoicing header: DFKKINVDOC_H

Invicing item: DFKKINVDOC_I

 

FICA documen number (as OPBEL) referring invoicing document number(as XBLNR):

 

CA AR/AP table: DFKKOP

Header table: DFKKKO

 

Also, for your reference below are table data for billing document (which is the source document for invoicing):

 

Header: DFKKINVBILL_H

Item: DFKKINVBILL_I

 

Hope it helps.

 

Please let me know if you want more information.

 

Thanks,

Bodhisattwa

Re: Joining PO and Invoice data

$
0
0

I am almost there, I am confused, which one houses PO doc's and which one INvoice doc's? I need to pull from the table itself and check document entry dates


Re: position for the legend ui5 vizcharts

$
0
0

Hi Shahid,

 

Can you share your code?

 

Regards,

Sai Vellanki.

Long text in title overwriting contentWidth property of ResponsivePopover

$
0
0

Hi,

 

I am using the sap.m.ResponsivePopover and I am setting the contentWidth to 30%.

 

If I have a short title and a huge content everything is fine.

title_good.PNG

If I have a huge title, then the title increases the size of the ResponsivePopover without respecting the contentWidth of 30%.

title_bad.PNG

 

 

You can see my problem in this snippet:

http://plnkr.co/edit/UBkbfg

 

Is there any way to show ellipsis if the title length goes beyond the contentWidth of 30%?

 

Thanks

Re: Demand not working in mrs planning board

$
0
0

Resolved,

First of all check weather the owrk centre assigned to the operation is same or changed when the demand was created ? and also check the HRMS tab and the org unit assignemengt .

If some one still face this issue please get back to me.

Sending two files with duplicate records at the same time

$
0
0

Hi Experts,

 

I want to joined two data files together, but they have different data fields, the same records such as employee Lucy Smith (ID: 123) as below appear in both files and the duplicates have to be removed. I am wondering how is it possible to be done in SAP PI, using ccBPM?

 

Below is the sample data:

1. Data in file 1, the first data field is Employee ID:

    234, Debbie, White

    123, Lucy, Smith

    225, Mark, Jones

2. Data in file 2, the first data field is Employee ID:

    567, Lisa, Brown, Research and Development, Contractor

    896, Kevin, Davis, Sales, Regular Employee

    123, Lucy, Smith, Human Resources, Regular Employee

 

The expected output data file should look like:

    234, Debbie, White, ,

    123, Lucy, Smith, Human Resources, Regular Employee

    225, Mark, Jones, ,

    567, Lisa, Brown, Research and Development, Contractor

    896, Kevin, Davis, Sales, Regular Employee

   

 

Thanks in advance!

Blue

Re: Flex Error "no owner ID found" in SAP UI5 Application

$
0
0

Hi Prabhat,

 

Did you already solve this annoying error?

 

Now we met the same error....

Viewing all 8594 articles
Browse latest View live




Latest Images