Hi Ani,
I believe you will need to create a hierarchy based on 0CALDAY with 0CALMONTH and 0CALWEEK as attributes.
Consider adding 0CALMONTH and 0CALWEEK as Characteristics in your InfoProvider.
John Hawk
Re: Time hierarchy using 0CALMONTH and 0CALWEEK
↧
↧
Re: Method SingleSignIn.ViewPatientProfile can not be reflected.
1. Would we run into any other issues using PB.NET with any other methods from this WSDL, i.e. how many more would I have to test to be confident this will all work in PB.NET?
Hard to tell. Test them all to be sure. Or at least test those you plan to use. I wouldn't expect too many difficulties.
2. How much effort to now take this PB.NET proxy .dll and make it into a COM callable wrapper that can be called from our PB Classic application? Which I guess we'd have to do anyway in C#.
You can do it all from PowerBuilder. Create a .Net Assembly target in PowerBuilder.Net that uses that WCF client. You can then expose that as a COM object just using tools from the .Net SDK.
3. Do we have any other options?
A couple:
1. Do the same thing, but use VS.Net instead of PB.Net to create the .Net assembly.
2. Use either PB.Net or VS.Net to create an proxy web service that calls this web service and returns the results either using ASP.Net Web Services or WCF but using the XMLSerializer rather than the DataContractSerializer it WCF defaults to). You could then use PowerBuilder Classic to call that proxy web service.
↧
Re: Select material based on vendor
Dear Juwin,
Thanks for the reply, yes as you said for basic purpose the source list will be helpful, but here we want to restrict the users not to raise PO with some other material which is not pertaining to that Vendor, that is why we we are going for the POP UP option,so is there any User exit or any other way this can be achieved ?
Thanks
↧
Re: Method SingleSignIn.ViewPatientProfile can not be reflected.
Hello Chris:
What I've tried in PB.Classic and doesn't work when calling any of the methods is:
1. Used the WSDL from the web and not a local one.
2. Used the .NET Engine
3. This generates the proxy class just fine, but errors when calling ViewInbox, for example.
I haven't tried:
1. Bring down the WSDL locally and using that
2. EasySoap
3. local WSDL and .NET Engine
Are you saying I need to have the WSDL local and/or use SingleWsdl. I haven't tried that.
Thx again.
↧
Re: saplogon.ini is not working for SAPGUI 7.4
hi
I am expecting the sap logon pad with connection entries as shown below. But mine is empty. the only one entry seen there is added manually
step1 - installed sapgui7.4
step2 - put the sap logon ini file in commons folder and restarted laptop, didn't work
step3 - uninstalled sapgui, deleted all folders and re-installed, restarted. didn't work
step4 - uninstalled sapgui, put the saplogon file, and re-installed, restarted. didn't work
step5 - uninstalled sapgui, deleted all folders and re-installed without nwbc, restarted. didn't work
its taking too long to try all the above steps. I still didn't get result.
am I doing uninstall process wrongly ?
thanks
bhakti
↧
↧
Project item no. not specified in a requirement.
Hello gurus,
When I am creating normal delivery(VL01N) with reference to sales order I am getting this error.
ERROR: Project item number not specified in a requirement.
Massage no. AG005
I went through the older post of this same issue but could not able to resolve.
kindly help me.
Thank you
Sonal..
↧
SAP down after SQL 2014 Upgrade
Hello Manuel,
I have the same problem, but one version higher, as we are using MSSQL Server 2014:
Error: The driver release (11) is lower than the server release (12)
and all the WP are dying... According to Microsoft, there is no Native client 12 !!!!!!!!!
What to do now ???
It says "There is no SQL Server 2014 Native Client". I am sorry, but I can't post the link, as for some strange reason, copy-paste is not working :-(
↧
Re: Half shown view my posts
Hi Pavan,
I just tried Chrome, Firefox and IE all seemed to work fine for me. Please try again, I cannot reproduce. Please let me know if there is some other setting you are using.
with kind regards,
Bill
P.S. also check your zoom level.
↧
Re: Notification functionality not working for Followed Tags
Hi Khusan,
Thank you for the feedback. I will add this to feedback. Spoke to Nadine and we will have a discussion regarding this next week.
Thanks,
Bill
↧
↧
Display an error message in debug mode
Hi Experts,
I am in debug (/h) mode screen of a program ZXXXXX and during the flow check come across the error message "MESSAGE e197" in the code. Is there a way by which I can see what is this error message detail directly in the debug mode screen? for example by using some commands like F4 will work if I place the cursor on this message?
Thanks
Sakthi
↧
Re: Cannot escape from profile page
Hi Pavan, thanks for your feedback on this issue. I will add to known bugs listing, thanks again.
with kind regards,
Bill
↧
Re: How to fill a table column with a value from other column of same table
Hi Dirk,
I tried with 12 only. Tried two times but job terminated after loading hardly 5,30,000 records with this error :
ODBC data source <MIS_ORACLE> error message for operation <SQLExecute>: <[SAP BusinessObjects][ODBC Oracle Wire Protocol
8744 1356 DBS-070401 5/28/2016 12:05:56 AM driver][Oracle]ORA-01653: unable to extend table DRL_MIS.T5 by 1024 in tablespace USERS>.|<Regular Load Operations>|<T5>
I something bad in logic again?
↧
Re: SAP down after SQL 2014 Upgrade
Hi Symon,
Just a side note, it is always better to place a new thread for an issue you are facing. That will help to get your thread answered. You may also refer in your thread the link to the thread you found that could be similar but was not helpful.
--------------------------------------------------------------------------------------------
What is the SAP NetWeaver version and SPS you are running?
What is the version of SAP KERNEL and the PL?
Make sure to read the database upgrade guide available at the Installation guides http://service.sap.com/instguides -> Database Upgrades -> MS SQL Server: Upgrade to and Installation of SQL Server 2014.
Check also SAP Note https://launchpad.support.sap.com/#/notes/1831774
Best Regards,
Luis Darui
↧
↧
Re: Multiprovider based Query displaying inappropriate output
Shreeja,
Did you turn on repeating characters? In the example you provide it would appear that you just need to adjust the output of the report to have repeating values.
Thanks
James
↧
Re: Best practice to print a PDF from SAP Work Manager 6.3
OpenUI code is based on the Client
WPF Client = C#
Android = Java
iOS = Objective C
↧
basic spro configuration for process control 10.0
Hi guys
Could you please provide me the documents for GRC PC 10.0 basic SPRO configuration?
Thanks
↧
Re: Output type settings in IMG - Default values tab and partner functions
Jelena,
The values setup in Tab Default values in an output type configuration flow in as default values in the output condition record when created. This is why, maybe, Shiva V is giving that suggestion.
The actual purpose of setting up Default values in an output type in NACE is the above.
TW
Syed ahmed Razvi please see the reason for values in Tab Default values. This can be found in Glynn C William's text book.
↧
↧
Re: Error in BDC while inserting items in Maintenance Plan Object List
Hi Ashish Trivedi, you can use standard program RIIBIP00 (Transaction code: IBIP) for uploading Maintenance Plan. It requires upload data as sequential file and the sequence of records in the input file is very important. You can go through its documentation for better understanding of file structure and how to make use of IBIP. All the Best. Best Regards !
↧
Too much Activity Types in production orders
Hi Experts,
My client needs control 15 activity Types in production orders, because they want to see much details en Cost Components structure (transaction MLCCSPD )
- The first 4 activity types are labor, energy, time machine, oil
- "The others" are indirect cost concepts (For example: taxes, equipment rental, insurance, etc.)
I have two alternatives:
1. Create virtual work center and production users must notificate all activity types.
2. Create a Z program to notificate "the others" activity types.
There are other alternatives?
Thanks in advance for your help.
Regars,
Pepe Lucho
↧
Re: How to disable Reason For Rejection field once Delivery Order created?
Anthony,
What issue is the business encountering, for which you are thinking of disabling the RoR button once delivery is created for that line item, of the sales order?
TW
↧
More Pages to Explore .....
