Re: My DB02 > Alert monitor >space management > tablespace not show data (gray display)
Re: sap disp+work .exe stopped in mmc
hi,
please post output of r3trans -d.
Thanks
Ramesh yadav
Re: Issue With E-mail id number in customr master
Hi Madhu
For example if we maintained email as dummy@1-------id number generate as 001,
dummy@2--- id number is 002. Delete the both e-mail ids and then enter new e-mail system give the new id number i.e 003. which should not be required for requirement we need the again serial number id i.e 001 and 002 for adding new e-mail.
Thanks
PBR
Re: Error in transmission for SC trying to create a PO .
Hey Thanks all let me try to do each of these solutions check and get back ..
IS validation rule export to Data Services invalidates datastore logon details
I am exporting an Information Steward validation rule to Data Services; a part of the rule is a database table lookup. In the export process, IS creates a new datastore with that table I'm doing the lookup against.
The problem is that every time I re-export the rule after changing it, I have to maintain db server logon details in that generated datastore again.
Have I missed a configuration step, or it's just an error to raise through OSS?
Re: HCM Processes and Forms Unable to approve from NWBC HTML
Hello Raghavendra,
Kindly let us know the details of the entry made in the table IBO_C_WF_TTAC. Currently we are facing the same kind of an issue.
Regards,
Ramesh
Re: Issue in accounting in Import Procurement
Hi,
You are right, I would receive an invoice of 128 from the vendor. But as I said, because of the way I have set up my pricing and because I need to add the customs charge to the material cost and also apply my VAT on basic price + import/custom duty, the system is expecting an amount of 228 during MIRO.
Regards,
AB
help regarding ehp6
hii experts... i want to abt changes in ehp1 to ehp6 in finance module.. our component version is ecc6.0 but our client never upgraded the ehp version from 2008... so he asking for some document which can show changes in finance module ... please help me if changes are there in finance module...
Regards,
Abhay
Re: Error in OAYZ (Message no. AC166: Area 60 is not a real area)
Dear Deepthi,
I have not found any entry in table T082AVIEWB. Then how should i solve this issue now?
Regards,
Tarak Nafade
Re: Error in Consuming WSDL in ABAP
Dear Annapuma,
I tried another dummy WSDL with document/literal binding but i am still getting the same error in SAP. Again this WSDL works fine in SOAP UI and XMLSPY. Kindly have a look on this WSDL please. I think this is complete WSDl as well.
<?xml version="1.0" encoding="ISO-8859-1"?>
<definitions xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:SOAP-ENC="http://schemas.xmlsoap.org/soap/encoding/" xmlns:tns="urn:servicename" xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/" xmlns="http://schemas.xmlsoap.org/wsdl/" targetNamespace="urn:servicename">
<types>
<xsd:schema elementFormDefault="qualified" targetNamespace="urn:servicename">
<xsd:import namespace="http://schemas.xmlsoap.org/soap/encoding/"/>
<xsd:import namespace="http://schemas.xmlsoap.org/wsdl/"/>
<xsd:complexType name="DoSomethingRequestType">
<xsd:all>
<xsd:element name="Name" type="xsd:string" form="unqualified"/>
<xsd:element name="Age" type="xsd:int" form="unqualified"/>
</xsd:all>
</xsd:complexType>
<xsd:complexType name="DoSomethingResponseType">
<xsd:all>
<xsd:element name="Pass" type="xsd:boolean" form="unqualified"/>
</xsd:all>
</xsd:complexType>
<xsd:element name="DoSomething" type="tns:DoSomethingRequestType"/>
<xsd:element name="DoSomethingResponse" type="tns:DoSomethingResponseType"/>
</xsd:schema>
</types>
<message name="DoSomethingRequest">
<part name="parameters" element="tns:DoSomething"/>
</message>
<message name="DoSomethingResponse">
<part name="parameters" element="tns:DoSomethingResponse"/>
</message>
<portType name="servicenamePortType">
<operation name="DoSomething">
<documentation>N/A</documentation>
<input message="tns:DoSomethingRequest"/>
<output message="tns:DoSomethingResponse"/>
</operation>
</portType>
<binding name="servicenameBinding" type="tns:servicenamePortType">
<soap:binding style="document" transport="http://schemas.xmlsoap.org/soap/http"/>
<operation name="DoSomething">
<soap:operation soapAction="http://10.101.0.10/abcd/SOAP-SERVER/lib/two.php#DoSomething" style="document"/>
<input>
<soap:body use="literal" namespace="urn:servicename"/>
</input>
<output>
<soap:body use="literal" namespace="urn:servicename"/>
</output>
</operation>
</binding>
<service name="servicename">
<port name="servicenamePort" binding="tns:servicenameBinding">
<soap:address location="http://10.101.0.10/abcd/SOAP-SERVER/lib/two.php"/>
</port>
</service>
</definitions>
Changes in OBBH - Substitution
Hi,
We want some changes in current process i.e. Business Area = Profit Center as defined in OBBH.
Now we have process a new Business Area with 3 Plants and wants Profitability as per Plant i.e.
Plant 1 = Profit Center 1
Plant 2 = Profit Center 2
Plant 3 = Profit Center 3
Can we define this process in Tcode OBBH as above.
Please guide.
Howto activate multicast for NW 7.40 kernel?
Hi experts,
Dispatcher is not stating after the kernel upgarde to 741.
Sat Apr 5 07:28:05 2014
NiDgSendToMulticastAddrLocalCheck: NiPeek for hdl2 failed with rc = -5
***LOG Q0I=> NiISetSockOpt: setsockopt (126: Cannot assign requested address) [/bas/741_REL/src/base/ni/nixxi.cpp 9154]
*** ERROR => NiISetSockOpt: SiSetSockOpt failed for hdl 19/sock 8
(SI_EADDR_NAVAIL/126; I6; DG; IPPROTO_IPV6-IPV6_JOIN_GROUP) [nixxi.cpp 9154]
*** ERROR => NiIDgHdlGroupAdm: failed to join ff01::e000:82 on interface 0.0.0.0 [nixxi.cpp 9572]
NiDgSendToMulticastAddrLocalCheck: NiDgHdlJoinGroup for hdl1 to ff01::e000:82 failed with rc = -10
*** ERROR => DpCheckMulticast: NiDgSendToMulticastAddrLocalCheck failed (-10) [dpInit.c 4046]
*** Fatal Error
***
*** Multicast datagrams do not work properly on this host.
***
*** Description
***
*** Multicast datagrams are needed for the server internal communication.
***
Any valuable input will be highly appreciable
Regards...JK
Issue in cancelling excise through J1IEX.
Dear All,
I have an issue regarding cancellation of excise invoice. Our user cancelled the excise invoice in the below mentioned procedure.
1. Cancelled material doc through MIGO not MBST.
2. Posted the vendor excise in J1IEX to reverse the excise.
Here the issue is when he posted the vendor excise in J1IEX for reversal of excise the user did not check the values he posted in J1IEX and when he tried to Cancel the excise invoice. ABAP RUN TIME error has occured. I have crosschecked the documents and found that Part 2 entries reversed are exactly double to the actual values to be reversed. When I checked at the table of Part 1 and Part2 entries Part 1 entries have been reversed twice for a single material document at the same time. I don't know how this has happened, as of my knowledge system cannot reverse part 1 entries twice for a single material document.As the Part 1 entries are doubled, the Part 2 entries are doubled and causing runtime while cancelling excise Invoice. Now my client wants this document to be posted correctly.
I Want to know how this has happened and I have to rectify this issue.
What should I do so that system can post the same values for reversal.
Kindly help me on this issue.
I am attaching Part 1 and Part 2 entries for 101 & 102 movt type documents related to this issue.
Regards,
Bhanu
Re: COPA -update new value field
Hi Anu,
Please Try COPA Correction. Please check the link below for the details.
Regards
Dinakar
Re: HTTP request failed500,Internal server error - in oDataModel in SAPUI5
Hi Experts,
Does any one face the same thing?
Kindly provide the suggestion for this solution. Also looking for the solution for the sending the updated records/multiple updated records from SAPUI5 to SAP database.
Re: SAP - MM.
Hi Nikhil,
please understand one thing, untill you will take any risk in your life i don't think you will gain anything better, so i think don't go through negative thinkings. As you have planned for SAP MM functional module , you can search for any authorised training center at Google nearby you, but please understand one thing, taking a certification alone never gurantees a job in sap world, so if you are thinking that you will get exposure by doing certification , its not dear.
So, what you have to do is, learn sam mm module at training center and then you should search job in any manufacturing or in major infrastructure company, search at Naukri.com (because they will negotiate in terms of experiences with respect to IT companies), one you will get any ggod job, work hard there so that you are able to play with mm, then you can switch towards any major IT company.
If you have any dought, feel free to ask.
Re: change the date
Guys, this discussion is 10 months old.
And OP has last logged on on Jun 17, 2013 11:46 AM.
Regards
Re: Confuse on PR & PO data migration approach new to MM module
Hi John,
When you go for data migration the things depends on your client requirement, what exactly they want to migrate. At the same time you have to consider system limitations & feasibility.
The general approach is to upload open valid PR / PO (Released / Unreleased) documents. The same should also be discussed with client.
Regards
Rashid Imam
Re: How Find GL or Cost center in SAP
Thanks for ur help
Re: Where to Begin? - Learning SAP
Thank you very much sir...
is it enough to get self study about ABAP ?
or
must to go proper training is needed?