Hi Kyung-Rak,
You need to activate environmentshell, follow the install guide below:
SAP Business Planning and Consolidation 10.1, version for SAP NetWeaver – SAP Help Portal Page
Andy
Hi Kyung-Rak,
You need to activate environmentshell, follow the install guide below:
SAP Business Planning and Consolidation 10.1, version for SAP NetWeaver – SAP Help Portal Page
Andy
If none of that helps you could display the BAPI function module in transaction SE37 and then have a look at the function module documentation. Most are very thorough.
When you post the document manually is the BAPI used? You could try putting a breakpoint at the start of the BAPI and comparing the values you are passing in with the values passed in by the SAP transaction.
No, everything you stated was correct, Typically they are two routes one is to apply stacks and one to apply SPs, But with Hr renewal its possible to get new functionality without upgrading all major components as it was never meant to be disruptive and thats what don is looking for, ie to get FP3. which released last month but via Support packs for EA HR
HI Dibyendu,
But the process is a new item is damaged,i need to sent it to subcontractor for repair,initially there would not be any movement of the particular component,then how can i achieve this process in sap,as i have to post the material to subcontractor after a Sub contract PO with damaged component ,but system is not allowing me to raise a PO,how can i process this scenario.
Hi Ninad ,
Check the employee / Manager master data - infotype 0105 and subtype 0001 and 0010 maintained or not.
Check the employee /manager relationship is maintained or not.
SWIA - check where work flow really stopped
SOST- Check the emails are triggering or not.
Thanks
Siva
Hi Avinash,
Thanks for your response..My user input -> 20150315 where three varaiables created to extract:
Mon = 03
Day = 15
Year= 2015
Now here is my expected logic, i should be able to try the Mon,Day, Year logic with the snapshot if this could compare with the fiscal start eg: 3/1/15 and fiscal end for eg: 4/4/15 to derive the fiscal period say for eg: 003/2015
Note: Input date is dynamic and should look up the above snapshot fiscal calendar table to derive the fiscal period out of it based on fiscal start and end date from the above snapshot. Manytimes the fiscal start and end date ends before the system start/end month dates.
For eg: above fiscal end date 4/4/15 is our april month accoridng to system date but it belongs to the calendar table of client where in from say 4/5/15 starts only for May Month period..
Appreciate your help..
Thanks,
-Dinya.
Hi Friends,
In WDA at run time is it possible to dynamically map an UI input field to the Context attribute already created ?.
Regards,
Vinodkumar.
As per my knowledge it is only meant for J1IIN and not for J1IS. You need to mention the rule inside customisable table J_2IRULES.
Regards
Binoy
Hi Vassilis,
Can you please explain why you are trying to achieve this ?
Still if you feel that it is for purpose then you can try it as follows:
In Menu Event: ( I am assuming that you want not to perform anything once user navigates through LAST Reord, First Record)
if (pVal.MenuUID == "1288" || pVal.MenuUID == "1289" || pVal.MenuUID == "1290" || pVal.MenuUID == "1291")
{
BubbleEvent =false;
}
In this condition you can include the FormTypes also if you want to make non-functional to these menus.
Hope it helps.
Thanks & Regards
Ankit Chauhan
Hi Jonathan,Mark and Bel
Thanks for the Reply,
Yes, I am talking about the WebI Rich Client only.
I am using BO 4.0 SP4 and Crystal Reports 2011 SP11. Thus they are in the same patch level. and even Java version is 7 update 67.
Regards,
Santhosh.S
Hi Gary,
Reading all the insights provided by all the members, i believe that though the industry is experiencing a low, the demand for IS-OIL consultants is not hit. The reason i say so is in most companies SAP is already implemented, so they require a dedicated team to look after their support projects. These companies usually have an inhouse IT team together with an outsourced IT partner. You can find your opportunities in both the areas. working in an inhouse IT team gives your job more stability and enable you to enhance your business knowledge. Working with a consulting firm gives you an opportunity to work with multiple clients.
As far as which area is having more opportunity and more rewarding, it is a very difficult aspect to measure. A company will require a significant number of all, JVA, PRA, as well as Downstream resources to manage its own operations. Also the demand in all these areas is adequate as skill set is quite niche. The key aspect to choosing your stream is your interest. If you are more inclined towards distribution, then i would suggest you to invest your time and effort in it. It will reward you much more in the long run. Learning something just for the sake for earning more money will not help you to develop key understanding on the subject. This is off course my personal viewpoint.
Hi Avinash,
Even i also don't know about exact requirement,I am looking for end to end any e filing scenario,as i don't have any idea about that.If you have any document related to that please share to me.
Thanks & Regards,
AS
Hi jitendra,
table types: it can be declared locally as
types : begin of itab,
kunnr type kna1-kunnr,
name1 type kna1-name1,
end of itab. *this is called structure*
types: tt_itab types table of itab. *tt_itab is the table type*
or by global in se11 in datatypes choose table types and there we define the table type
and the above mentioned structure (itab).
so in short it is mainly used for creating the internal table in se38.
and to define the work area we can use the
wa_itab type itab.
line type: it is one of way to define the table type,in which there will be many fields in simple you are telling the table type should be having the structure as it.
so wat you have done in your example in the query is that you created structure locally and created internal table and work area from it.
hope u got it.
Hi Team,
I am getting this error for only one workflow and it is come frequently.
Error Source (expression '&BUS2012.PURCHASEORDER&') of binding assignment is not available
I had refreshed SWU_OBUF,checked SWU3 everything is fine.After upgrade is it the issue because i had only changed this workflow.
Binding is proper it was working earlier now also it is working but for few PO's it is giving error.
Kindly help.
Hi,
1. Reactivate transformations and later check it.
At source cube all loaded request are available for reporting?
2. As i know there is no options to change break point at a time from all transformations.
Need to go each transformations and check it. if its there then delete it in change mode and save/activate transformations.
Thanks
Hi Abhilash. I talked to our DBM, and he gave me the SQL for the command. This is what it looks like:
Select Top 6 c.MAINFIELD, c.DATEFIELD
From MAINTABLE
Where c.MAIN_ID = '12345'
Order By c.DATEFIELD Desc
I tested it out by grouping by Command.DATEFIELD, and it showed only the 6 most recent results. Perfect. Then, I added Command.DATEFIELD to Columns in my crosstab and refreshed. It was a 2 minute wait. Yikes! I tried a few times, and it was always a 2 minute wait with the SQL command added to the crosstab column. As much as I like the results, our customers won't want to wait that long to run their reports.
So I'm back to trying to think outside the box on this. Is there any other way to display the 6 most recent dates from a field in a crosstab?
1. One idea I had involved Run Totals. I grouped the MAINTABLE.DATEFIELD in descending order, added a Run Total on count of DATEFIELD to evaluate on change of the group, and put it in the Group Header. It gave me a nice running count of all the dates. Is there a way to filter based on the Run Total, showing only the Run Total count less than 7?
2. A second idea involved the columns of the crosstab. With MAINTABLE.DATEFIELD as a column, sorted descending, all of the dates were displayed correctly from left to right. Is there a way to limit the crosstab by column count? Basically, tell the crosstab to only display the first 6 columns.
Any ideas would be great. Thanks!
I too face the problem after my OS re installation Will wait for '4 Hrs'
Sree..